How Vancouver is Keeping Water Safe & What You Can Do at Home
The safety of drinking water is under scrutiny throughout the nation with the crisis of lead contamination in Flint, Michigan. The City of Vancouver Water Utility encourages people everywhere to become more informed about the quality of their drinking water. Below are some important facts you should know about your water, from its source to your home.
In addition, while the City of Vancouver is responsible for providing high quality drinking water, we are unable to control the variety of materials used in plumbing components within private homes and other buildings. That’s why we also want you to know about simple steps you can take to reduce concerns about potential lead in home plumbing, typically dating back to 1986 and before. We've also provided information about local laboratories where you can take your water to have it tested.
Lead is not present in our source water at Vancouver’s Water Utility. Our Utility is one of the largest public water systems in the state of Washington, serving more than 230,000 people. All of Vancouver’s water comes from groundwater. Lead is not naturally present in our local groundwater, which is also typically less corrosive than surface water. Currently, more than two-thirds of Vancouver’s water is further treated to make it even less corrosive. Our water stations are interconnected to maximize the benefits and ensure supplies across the community.
There are no lead water mains in Vancouver’s water distribution system. And, unlike many East Coast cities, there are no known lead service lines that run from the main to the meter and no known lead 'pigtails' .
Vancouver’s water is closely monitored and put through rigorous testing at its sources and within the distribution system. Our testing goes beyond what is required by state and federal laws. In addition, results are mailed to all customers and posted on the webpages at www.cityofvancouver.us/water.
The primary source of lead in drinking water here is from household plumbing installed prior to 1986. Lead was used to solder household plumbing and used at higher concentrations in some brass fixtures before 1986, when regulations were strengthened. Lead from old household plumbing has a potential to leach into the water when water sits in pipes. Elevated levels of lead can cause serious health problems, especially for pregnant women and young children.
Other factors: While age of plumbing is a good indicator, it is not the only factor involved when it comes to potential for lead contamination. Other factors are how long water sits in the pipes and how corrosive the water is. The more time water is allowed to sit in pipes and the more corrosive the water, the greater the possibility for dissolved metals. Fortunately, as noted above, groundwater source is typically less corrosive than surface water, and further treatment makes it even less corrosive.
Vancouver’s Water Utility has been periodically sampling water at homes for lead since 1992. EPA’s Lead and Copper Rule requires that all public drinking water systems regularly test a sample of potentially high-risk homes for lead at an inside tap. The risk level is based upon when the homes were built, typically prior to 1986. In compliance with these regulations, Vancouver’s Water Utility currently tests water in 50 residences every three years for lead contamination from home plumbing. The homes are selected based upon when they were built and on the residents’ support in assisting with the testing. Our first round of monitoring began in 1992.
The most recent testing occurred in July 2014, and those results show lead and copper concentrations below EPA action levels at all residences involved in the monitoring. Individual sampling results for lead in the 2014 testing ranged from zero (0) parts per billion to 3.8 parts per billion. The average of all lead readings was 0.5 parts per billion, and the median, which is the midpoint of all sample results, was zero (0) parts per billion. For reference, EPA’s goal for lead in drinking water is zero (0). EPA regulations require that utilities take action if more than 10 percent of the tested homes have lead concentrations higher than 15 parts per billion in water from their taps.
- Run the water at the tap to allow it to flush out any potential for lead. If you haven't used water for several hours, let the tap run until the water is noticeably colder ‒ from 30 seconds up to 2 minutes ‒ before using the water for drinking or cooking.
- Only use cold, fresh water from the cold water tap for drinking, cooking and especially when preparing baby formula. Do not use hot water for cooking, drinking or baby formula; lead more easily dissolves in hot water. Boiling water will not reduce lead.
- Clean aerators or screens on faucets frequently to remove any possibility of captured lead particles.
- Some filters are approved to reduce lead. If using a filter, maintain and replace it according to the manufacturer's directions. Contact NSF International at (800) NSF-8010 or www.nsf.org for information on standards for water filters.
- Have your water tested if you are concerned about lead contamination from your home plumbing. Be sure to use a lab certified for testing drinking water and carefully follow the instructions you are provided. Where to go for testing: In Clark County, BSK Analytical Laboratories, at the former Addy Labs in Vancouver, provides water testing services. A standard lead test of a home's drinking water typically costs less than $30. Contact them for details. Location: 2517 E Evergreen Blvd, Vancouver, WA 98661. Phone: 360-750-0055. In Cowlitz County, ALS Environmental of Kelso also provides water testing services. Location: 1317 13th Ave S, Kelso, WA 98626. Phone: 360-577-7222. A full list of accredited labs in Washington for drinking water can be found on this Department of Health webpage.
PLEASE NOTE: The primary source of exposure to lead in our region is from old lead paint chips and dust, typically paint from prior to 1978. Information on steps you can take to minimize exposure is available from this EPA webpage. Other sources of lead include contaminated soil, drinking water, children’s toys and jewelry, workplace and hobby hazards, imported candy, and traditional home remedies and cosmetics. Visit this Washington Department of Health webpage to learn more about these common sources.The state DOH also has a Childhood Lead Poisoning Prevention Program. Click here for online information or call 1-800-909-9898.
July 20, 2016